SofTex™

$27.02$320.48

SofTex™ is a versatile, easy to apply material. Translucent and soft to the touch, it can be used to create linen effects and dimensional color patterns as well as simulating heavy fabric. As a result of its excellent bonding capability, water-based SofTex™ is able to fill minor wall cracks and defects. In addition, SofTex™ also has sound absorbing qualities that make it a truly unique material.

Clear
Approved Application Area Walls, Ceilings
Application Method Brushed, Rolled, Stippled, Troweled
Clean Up Soap & Water
Approved Climate Rating Interior
Consistency (Density) Textured Plaster
Available Sizes & Square Footage 5 Gallon Pail- 501 - 1000
1 Gallon Pail- 101 - 200
32 Oz Pail- <100
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture Medium Grit
Intermix No
Manufacturer Faux Effects International
Product Line Silver Line
Sheen (Finish) Matte (Flat)
Shelf Life 120 - 365 Days
Approved Substrate Primed Drywall, Painted Drywall
Suggested Additives No
  • In areas of heavy traffic, a light coat of ColorSeal™ will help prevent scratching or marring of the SofTex™ surface.
  • SofTex™ may be used for exterior applications; however, under certain conditions a special UV topcoat, such as AquaGardUV™ is recommended. AquaThane™ is the preferred topcoat to prevent the finish from extreme heat and freezing.
  • Normal drying time is 2 – 4 hours at 75º F.
  • For spray applications, thin SofTex™ up to 25% with water.
  • SofTex™ can be spatter sprayed, allowed to dry for 10 – 20 minutes and then dry brushed into a beautiful pattern.
  • Make sure the work surface is clean, dry and fully cured. For best results, apply 2 even coats of SetCoat® Clear or SetCoat®. Allow to dry 4 hours between coats and then overnight.
  • If desired, SofTex™ can be tinted with Faux Crème Color™ prior to application.
  • Using a brush, roller or spray unit, apply an even coat to the work surface. Then using a trowel, dry brush, large pouncing brush or comb, create a texture/pattern in the material. Different methods will result in a variety of textures, some softer than others.
  • Allow the SofTex™ layer to dry for approximately 2- 4 hours (depending on drying conditions)
  • After the material is dry to the touch, additional layers may be applied to create a more dimensional surface.
  • Once SofTex™ is fully dry; the work surface can be further enhanced with a color glaze mixture such as AquaCreme™ combined with Faux Crème Color™.
  • V.O.C. Compliant
  • Durable finish
  • Do not apply in temperatures under 55°F, or in damp, cold or humid conditions.
  • Technical product- training through Faux Masters Studio workshop recommended
Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.