Shop

RsWaterWax®

$29.28$90.16

RsWaterWax® is a finely milled wax that can be applied without leaving any trace of the application method. This wax is so unique and of such high quality that it results in a finish that is beautiful to the eye as well as the touch. RsWaterWax® is a fabulous final touch to any decorative finish.  RsWaterWax® dries to a chalky, off-white color to add a soft patina effect to your finishes and can be buffed to a semi-gloss sheen.

Clear
SKU: 000040 Categories: ,
Approved Application Area Walls, Ceilings
Application Method Troweled
Clean Up Soap & Water
Approved Climate Rating Interior
Consistency (Density) Wax
Available Sizes & Square Footage 1 Gallon Pail- 201 - 300
32 Oz Pail- <100
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture Smooth (Paint Like)
Intermix No
Manufacturer Faux Effects International
Product Line Gold Line
Sheen (Finish) Satin (Semi-Gloss)
Shelf Life 1 -2 Years
Approved Substrate Painted Drywall
Suggested Additives No
  • Ensure that the work surface is clean, free of dust and grease/film. RsWaterWax™ is so versatile it can be applied over shellac, varnish, AquaGard™, as well as other topcoats.
  • Allow the product to dry thoroughly. Because RsWaterWax™ dries like a normal wax, the drying time will be approximately the same depending on the conditions.
  • When using tinted Rs WaterWax™ always apply thinly. One coat is usually sufficient.
  • If a lower shine is required, burnish the wax with cheesecloth. For a higher shine, burnish with a trowel.
  • Water can be added to thin the wax. Do not add over 5-10%.
  • Use small amounts of color when tinting RsWaterWax™. This material may be tinted with FauxCrème Color™ or FauxColor™. Do not add too much color or tint too dark; otherwise, the wax will show application marks.
  • MicaGlow Powder™ can be added to RsWaterWax™ for a fabulous finish.
  • Using a trowel, brush, Cheesecloth or soft lint-free pad, apply a thin even coat of RsWaterWax™ over the work surface.
  • Using a trowel or Cheesecloth, burnish RsWaterWax until the desired shine is achieved. This material can be burnished when it is almost dry or fully dry.
  • V.O.C. Compliant
  • Low odor
  • Do not apply in temperatures below 60° F or in damp, cold or humid conditions
  • Technical product- training through Faux Masters Studio workshop recomended
Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.