Shop

QuartzStone™

$23.08$315.30

QuartzStone™ is a semi-transparent, white color product that when dry gives the look of quartz or a cameo stone surface. Extremely durable, it is a good choice when producing slate or stone finishes for flooring and provides a rich look for columns, table bases, and stonewalls.

Clear
SKU: 000109 Category:
Approved Application Area Walls, Ceilings, Floors (Wood), Floors (Cement), Countertops
Application Method Brushed, Rolled, Stippled, Troweled
Clean Up Soap & Water
Approved Climate Rating Interior/Exterior
Consistency (Density) Heavy Plaster
Available Sizes & Square Footage 5 Gallon Pail- 501 - 1000
1 Gallon Pail- 101 - 200
32 Oz Pail- <100
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture Medium Grit
Intermix No
Manufacturer Faux Effects International
Product Line Gold Line
Sheen (Finish) Matte (Flat)
Shelf Life 120 - 365 Days
Approved Substrate Primed Drywall, Painted Drywall, Melamine
Suggested Additives No
  • Apply two coats of SetCoat®, allowing the first coat to dry at least 4 hours, and the second coat 24 hours.
  • Set up grout lines mimicking a stone pattern using painter’s tape.
  • Using a brush or trowel, apply a 1/8” layer of QuartzStone™. Wait 15-30 minutes and level off any high peaks with a smooth, flexible trowel. Allow drying 1-4 hours.
  • When dry, apply a color wash using water and FauxCrème Color™ using rock or slate-like tones. Blot off excess color.
  • When dry, seal color with ColorSeal™; let dry, and follow with a thin coat of C-500™.
  • Apply two coats of SetCoat®, allowing the first coat to dry at least 4 hours, and the second coat 24 hours.
  • Set up grout lines mimicking a stone pattern using painter’s tape.
  • Using a brush or trowel, apply a 1/8” layer of QuartzStone™. Wait 15-30 minutes and level off any high peaks with a smooth, flexible trowel. Allow drying 1-4 hours.
  • When dry, apply a color wash using water and FauxCrème Color™ using rock or slate-like tones. Blot off excess color.
  • When dry, seal color with ColorSeal™; let dry, and follow with a thin coat of C-500™.
  • Apply two coats of SetCoat®, allowing the first coat to dry at least 4 hours, and the second coat 24 hours.
  • Set up grout lines mimicking a stone pattern using painter’s tape.
  • Using a brush or trowel, apply a 1/8” layer of QuartzStone™. Wait 15-30 minutes and level off any high peaks with a smooth, flexible trowel. Allow drying 1-4 hours.
  • When dry, apply a color wash using water and FauxCrème Color™ using rock or slate-like tones. Blot off excess color.
  • When dry, seal color with ColorSeal™; let dry, and follow with a thin coat of C-500™.
Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.