LusterStone®

$27.29$464.94

LusterStone® is a revolutionary architectural coating that produces beautiful reflective stone-like patterns. This product is unsurpassed in its simplicity, versatility and ease to repair. The nature of the material, allows it to be used to create a stunning variety of high/low dimensional finishes that do not require burnishing to obtain designer quality results.

Clear
Approved Application Area Walls, Ceilings, Cabinets (Pre-Finished)
Application Method Rolled, Troweled
Clean Up Soap & Water
Approved Climate Rating Interior
Consistency (Density) Textured Plaster
Available Sizes & Square Footage 5 Gallon Pail- 501 - 1000 (Available in specific colors)
1 Gallon Pail- 101 - 200
32 Oz Pail- <100
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture Sand Grit
Intermix No
Manufacturer Faux Effects International
Product Line Silver Line
Sheen (Finish) Metallic (Shimmer)
Shelf Life 1 -2 Years
Approved Substrate Primed Drywall, Painted Drywall
Suggested Additives No
  • Apply 2 coats of SetCoat® or SetCoat® Clear. For best results choose a color that is similar to the LusterStone® hue. Allow this base to dry for a minimum of 24 hours.
  • Using a 1/4" sponge/nap roller apply an even smooth coat of LusterStone®, moving the roller in a random pattern. If necessary, LusterStone® may be thinned up to 20% with water for this step. Allow the LusterStone® to dry for a minimum of 2 hours, then sand lightly with 220 grit sandpaper.
  • For the second coat, apply LusterStone® to a flexible plastic or metal trowel. Using smooth sweeping strokes 12" to 24" in length spread a thin even coat of the LusterStone® to the work surface.
  • Keep the LusterStone® coat thin and smooth. LusterStone® may be thinned up to 10% with water for this step. Once the material has dried for at least 2 hours, lightly sand and then reapply the LusterStone® to any missed spots or areas of low coverage.
  • If a higher shine is desired, fine sanding and repeated thin wet coats of LusterStone® can be applied. Sand with 220 grit or finer sand paper and thin the LusterStone® with up to 30% water for this procedure. Trowel the material on to the work surface, and then go back over it, pressing the LusterStone® into the surface while scraping it off at the same time. This method will produce a very tight finish that does not require any further polishing.
  • Mix thoroughly before each use.
  • To obtain the best results, attend a manufacturer approved workshop.
  • Under normal conditions, no topcoat is required. A topcoat may be used in areas such as kitchens and bathrooms where extra protection is required.
  • When repairing, sand the damaged area first, wipe down and then reapply LusterStone® in thin even coats.
  • Always make a sample to ensure the desired result.
  • Close the container after each use. Keep air tight. Keep the sides and edges of the container clean. Do not allow dried product to fall into the wet material. A sheet of plastic wrap pressed onto the materials surface will keep it from drying and protect it from foreign matter.
  • LusterStone® can be applied to irregular surfaces such as ironwork and assorted fixtures by brush or spray.
  • On large walls the application process can be started and stopped at any point in the process without experiencing lap lines.
  • LusterStone® works well as a fill coat on textured surfaces.

Available Color Samples (Please make a selction above)

Color Options

ancientgray
antique parchment
azure blue
black diamond
bordeaux red
brown suede
cantaloupe
caramel sundae
champagne mist
chantilly lace
charred gold
charred olive
cobalt blue
coco plum
cocoa
copper
cotton white
crimson red
crushed pearl
deep periwinkle
ebony frost
eggplant
emerald ice
espresso
frosted denim
green onyx
inkwell blue
lady slipper pink
mandarin red
medallion gold
merlot
midnight blue
mocha
moonglow silver
mustard seed
orchid ice
ox blood
peacock blue
queen anns lace
rhino
royal jade
sage green
silver moss
silver taupe
snowflake white
tequilla sunrise
terra cotta
weathered bronze

*While every effort is made to accurately display color samples, the above image renderings and color swatches are for reference only. Please do not base any color purchases on images or swatches as actual color may vary slightly due to various monitor and graphics card settings.

  • V.O.C. Compliant
  • Low Odor
  • Smoke Development: 15
  • Flame Spread and Smoke Development Indices: Class A
  • Sheen: Low Luster
  • Environmentally friendly
  • Do not apply in temperatures below 55°F, or in damp, cold or humid conditions.
  • Technical product- training through Faux Masters Studio workshop recommended

Some product attributes will vary depending on application method. LusterStone® square footage, finish texture, and sheen can are all dependent on application methods and techniques.

NEW LusterStone® Deluxe Colors include:

Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.