Shop

O’Villa Sabina™

$22.11$292.92

O’Villa Sabina™ is an exceptionally beautiful, versatile product that contains refined marble dust and contrasting sand-like particles. Creamy to the touch and a delicate off-white color, O’Villa Sabina™ glides easily across most surfaces. Applied by trowel, it can be manipulated to create subtle, embedded sand effects or bold patterns. A simple two coat application will produce remarkable results. Easy to compress and burnish, it can be utilized to create a smooth surface with a soft patina, suitable for a wide variety of looks from contemporary to Old World.

Clear
Approved Application Area Walls, Ceilings
Application Method Troweled
Clean Up Soap & Water
Approved Climate Rating Interior
Consistency (Density) Textured Plaster
Available Sizes & Square Footage 5 Gallon Pail- 501 - 1000
1 Gallon Pail- 101 - 200
32 Oz Pail- <100
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture Medium Grit
Intermix No
Manufacturer Faux Effects International
Product Line Gold Line
Sheen (Finish) Matte (Flat)
Shelf Life 120 - 365 Days
Approved Substrate Un-Primed Drywall, Primed Drywall
Suggested Additives FauxCrème Colors™ or FauxColor™
  • O’Villa® Sabbina may be lightly tinted with FauxCrème Colors™ or FauxColor™. Do not add more than 6–8oz. of colorant per gallon. Too much colorant will ruin the integrity of the product and obscure the sand-like particles.
  • O’Villa® Sabbina may be thinned with water 10 – 20% with water for spray purposes.
  • O’Villa® Sabbina creates a beautiful finish all on its own; however, it can be layered or embellished with a number of other Faux Effects® products. (Please refer to the RsGranite® workshop sheet for instructions to create a beautiful and realistic granite finish utilizing O’Villa® Sabbina, MicaGlow™ Flakes, Venetian Gem® Finish Coat and RsGlaze®.)
  • Ensure that the substrate is clean and free of grease, dust, etc. For best results apply two coats of SetCoat® Clear or SetCoat®. Allow each coat to dry a minimum of 2 hours, depending on the drying conditions. For a clean, natural colored finish, a neutral white colored base will produce the best results.
  • Using a good quality stainless steel trowel, apply a full even coat of O’Villa® Sabbina to the basecoat. As the product is manipulated, the sand-like particles will gather and form random, natural deposits across the surface.
  • Heavy pressure with the trowel will crush the aggregate slightly, creating earth toned streaks of color resulting in directional patterns. Lighter pressure will result in a more subtle embedded sand effect with less movement. Each layer should not exceed 1/8” in thickness.
  • O’Villa® Sabbina may also be applied by brush or spray and then smoothed with a trowel. Allow to dry until firm, but not dry, approximately 1/2 to 3/4 of an hour.
  • Once the O’Villa® Sabbina has reached the ‘firm’ stage, compress and smooth the material using a stainless steel finishing trowel. Allow to dry thoroughly. When fully dry, the material may also be lightly sanded if desired.
  • Apply a second coat of O’Villa® Sabbina in the same manner indicated above. After the second coat has been compressed, smoothed out and allowed to dry completely, the surface may be burnished lightly with a finishing trowel to bring up a soft patina.

FauxStone™ Pull-Off and FauxStone™ Pull-Off Crusty vary slightly in their consistencies. FauxStone™ Pull-Off is a smooth plaster where FauxStone™ Pull-Off Crusty has super-fine textures leaving a slight crusty finish.

Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.