Fabric Effects™


Fabric Effects™ is a modern, water-based fabric paint that deeply penetrates most textiles, fusing to the cloth, resulting in a soft, permanent surface that is fade resistant and washable.

SKU: 000115 Category:

Available Color Samples (Please make a selction above)

Color Options

autumn brown
cloth white
dark brown
earth brown
french red
golden sienna
metallic bronze
metallic copper
metallic gold
metallic pearl
metallic red
metallic silver
ochre yellow
parrot green
royale blue
true green
van dyke brown

*While every effort is made to accurately display color samples, the above image renderings and color swatches are for reference only. Please do not base any color purchases on images or swatches as actual color may vary slightly due to various monitor and graphics card settings.

Approved Application Area Walls, Ceilings, Cabinets (Pre-Finished)
Application Method Brushed, Stippled
Clean Up Soap & Water
Approved Climate Rating Interior
Consistency (Density) Thick Liquid (Paint-Like)
Size (Product Line/Container) 8 Oz (Gold Line/Bottle)
Available Sizes & Square Footage 8 Oz Bottle- N/A (Additive)
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture Smooth (Paint Like)
Intermix No
Manufacturer Faux Effects International
Product Line Gold Line
Sheen (Finish) Matte (Flat)
Shelf Life 120 - 365 Days
Approved Substrate Primed Drywall, Painted Drywall, Painted/Pre-Finished Wood
Suggested Additives No
  • Thin with up to 20% water if desired.
  • Fabric Effects™ is opaque enough to embellish or re-color pre-existing printed fabric.
  • Watercolor-like washes can be created using Fabric Effects™ on certain types of fabric with the addition of water.
  • Use with all types of stencils using normal stenciling techniques.
  • For maximum durability, allow to cure for approximately 48 hours under normal conditions.
  • Colors may be intermixed to create a larger color selection.
  • Make sure the cloth is smooth and wrinkle free. Pin flat if necessary.
  • Depending on the type of fabric used, place absorbent paper or cloth underneath the fabric so that Fabric Effects™ will not bleed through to the surface beneath.
  • Using the appropriate brush for the intended design, apply Fabric Effects™ to the fabric.
  • Do not over saturate the fabric. If more than one coat is required (especially on thicker fabrics) multiple thin coats are more desirable.
  • Designs can be created in a single layer or built up to create depth in the design.
  • Fabric Effects™ dries quickly. Multiple colors can be layered without bleeding together or losing their color identity.
Weight N/A


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.