EZ Kleen™

$20.60$55.97

EZ Kleen™ is a specially formulated water base paint remover and spray gun cleaner. As a paint remover, concentrated EZ Kleen™ has the ability to eradicate even old, hard to remove paint. When diluted with water it may be used as a spray gun cleaner. It is also excellent for removing paint from synthetic bristle brushes.

Clear
SKU: 000116 Category:
Approved Application Area N/A
Application Method N/A
Clean Up Soap & Water
Approved Climate Rating N/A
Consistency (Density) Thin Liquid (Watery)
Available Sizes & Square Footage 1 Gallon Jug- Sq. Footage N/A (Gun Cleaner/Paint Remover)
32 Oz Bottle- Sq. Footage N/A (Gun Cleaner/Paint Remover)
Durability N/A
Finish Texture N/A
Intermix Warm soapy water
Manufacturer Faux Effects International
Product Line Gold Line
Sheen (Finish) N/A
Shelf Life 1 -2 Years
Approved Substrate N/A
Suggested Additives No
  • EZ Kleen™ is excellent for removing paint from many surfaces. Make sure to test the product first in a small area in order to ensure that the original surface will not be affected during the paint removal process.
  • EZ Kleen™ has a slight oily consistency. As a result there is no need to oil the gun parts between paint changes.
  • Do not allow concentrated EZ Kleen™ or diluted EZ Kleen™ mixtures to sit on any painted or top-coated surface. This will result in softening of the surface layer and possible removal or damage of the finish.
  • When used as a paint remover, apply the EZ Kleen™ and allow the product to sit for 5-10 minutes.
  • Method 1: For guns with dried paint buildup
    • Add 25 – 50% EZ Kleen™ to warm, soapy water.
    • Disassemble spray gun and place gun parts into this solution allowing them to soak for approximately 15 minutes.
    • Remove the parts from the solution and scrub with a nylon scrubber or medium to soft bristle brush such as a toothbrush or nail brush.
    • Rinse all parts thoroughly with water.
    • For extremely hard to remove paint, repeat the above procedure a second time or apply EZ Kleen™ full strength to those areas and scrub lightly. Rinse thoroughly.
    • Dry all parts completely with a soft cloth, spray with WD-40 or mineral spirits. Reassemble gun and store.
  • Method # 2: For quick cleanups between paint changes
    • With gun fully assembled, fill the gun cup with water.
    • Spray water through system until depleted.
    • Run the system for 1-2 more minutes to dry interior parts out.
    • Fill gun cup with a 50/50 solution of EZ Kleen™ and water.
    • Spray this solution through the gun until the cup is empty.
    • Spray the gun for 1-2 more minutes to dry the internal parts.
    • Refill spray gun cup with new paint color. Spray briefly 1-2 times before starting to paint. This will remove any EZ Kleen™ residue.
  • V.O.C. Compliant
  • Repeated contact may irritate skin, wear rubber gloves
  • Use adequate ventilation, do not breathe spray mist.
  • Do not use a furniture cleaner on previously painted or top-coated surfaces.
  • Environmentally friendly
Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.