Shop

C-500 Urethane™

$27.66$351.48

C-500 Urethane™ is a water based, pre-catalyzed polyurethane formulated to be used where maximum durability is desired. Because C-500 Urethane™ contains high grade proprietary urethane resins, this allows the product to fuse to AquaGard™, ColorSeal™ and other commercial grade paints.

Clear
SKU: 000030 Category:
Approved Application Area Walls, Ceilings, Floors (Wood), Floors (Cement), Floors (Other), Cabinets (Raw), Cabinets (Pre-Finished), Countertops, Plastic Accents (Switch Plate ETC)
Application Method Brushed, Rolled, Sprayed
Clean Up Soap & Water
Approved Climate Rating Interior/Exterior
Consistency (Density) Thin Liquid (Watery)
Available Sizes & Square Footage 5 Gallon Pail- 1001 - 1500
1 Gallon Jug- 201 - 300
32 Oz Jug- <100
Durability High Traffic- Highly Durable from wear & tear
Finish Texture Smooth (Paint Like)
Intermix No
Manufacturer Faux Effects International
Product Line Silver Line
Shelf Life 1 -2 Years
Approved Substrate Painted Drywall, Raw Wood, Painted/Pre-Finished Wood, Melamine, Cement, Plastic
Suggested Additives No
  • Excellent for interior/exterior applications including water fountain areas and decorative sinks, vanity and kitchen countertops, floors and furniture, as well as decorative walls and trim.
  • Thin with water when using C-500 Urethane™ in a spray application. Do not exceed 25% water.
  • With its anti-sagging characteristics, C-500 Urethane™ is excellent on vertical surfaces.
  • Do not apply in wet, humid or cold conditions.
  • Always make a sample to ensure the desired result.
  • Ensure the work surface is clean, dry and grease free.
  • Prepare the work surface by applying a coat of ColorSeal™ or AquaGard™. Because C-500 Urethane™ contains strong co-solvents, it is important to seal the work surface with a harrier coat, especially if delicate artwork is involved.
  • Using a sprayer, fine sponge roller, lambs wool applicator or fine brush; apply a light even coat of C-500 Urethane™ over the work surface. Allow the material to dry a minimum of 12 hours between coats. Two coats are usually sufficient for most applications.
  • Where a high build finish is desired, do not exceed 3 coats of C-500 Urethane™.
  • Fine sand or polish between coats.
  • V.O.C. compliant
  • Can be cleaned with most household cleaners
  • Non-Yellowing
  • Durable- excellent in water/wet conditions
  • Store in a cool, dry location to prolong shelf life.
  • Do not apply in temperatures below 55° F or in damp, cold or humid conditions
  • Technical product- training through Faux Masters Studio workshop recomended

C-500 Urethane™ is a marine type topcoat. Excellent for counter tops, floors, etc. (Water resistant)

Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.