Shop

SetCoat®

$15.75$352.62

SetCoat® (formerly known as AquaBond™) is designed to be used as a durable wall, trim and cabinet finish. It also performs extremely well as a superior basecoat under all of your decorative finishing projects. Because it allows AquaCreme™ and AquaGlaze® more open time for manipulation, SetCoat® is the recommended substrate for creating classic decorative finishes. This material has superb bonding and sealing qualities. It is appropriate for both interior and exterior applications. Unlike common latex paints, the high grade proprietary resins and manufacturing process of SetCoat® allows the material to be hand rubbed to a satin patina or wet sanded to a feathered edge.

Clear
SKU: 000013 Category: Tag:

Available Color Samples (Please make a selection above)

Color Options

While every effort is made to accurately display color samples, the above image renderings and color swatches are for reference only. Please do not base any color purchases on images or swatches as actual color may vary slightly due to various monitor and graphics card settings.
Approved Application Area Walls, Ceilings, Floors (Wood), Floors (Cement), Floors (Other), Cabinets (Raw), Cabinets (Pre-Finished), Countertops, Plastic Accents (Switch Plate ETC)
Application Method Brushed, Rolled, Sprayed
Clean Up Soap & Water
Approved Climate Rating Interior/ Exterior (See Color Options for exterior-rated colors)
Consistency (Density) Thick Liquid (Paint-Like)
Available Sizes & Square Footage 5 Gallon Pail- 1501 - 2000
1 Gallon Pail- 301 - 400
32 Oz Jug- <100
Durability High Traffic- Highly Durable from wear & tear
Finish Texture Smooth (Paint Like)
Intermix No
Manufacturer Faux Effects International
Product Line Silver Line
Sheen (Finish) Eggshell
Shelf Life 1 -2 Years
Approved Substrate Primed Drywall, Painted Drywall, Painted/Pre-Finished Wood, Melamine, Cement, Plastic
Suggested Additives No
  • During spray applications, thin SetCoat® up to 20% with water if necessary. (Not necessary in all spray units)
  • For roll-on applications, use a good quality sponge roller with a fine grain.
  • When applying metallic colors, finish roll in one direction.
  • Brush applications require a good quality brush designed for water based material.
  • Finish brush in one direction using light pressure to achieve a smoother surface.
  • Do not use over very dark colors. SetCoat® will dry with a slight frosting effect.
  • Thoroughly clean the surface before applying SetCoat® (AquaBond™).
    • For cabinets, furniture and Formica finishes, sand the surface with 220-grit sandpaper.
  • Apply SetCoat® using a brush, roller of spray equipment.
  • In most applications 2 thin to medium coats is recommended.
  • Allow SetCoat® to dry a minimum of 2 hours between coats and at least 8 hours before applying any glaze.
  • V.O.C. compliant
  • Low odor
  • Non-Yellowing
  • Water resistant
  • Low co-solvents
  • Store in a cool, dry location to prolong shelf life.
  • Do not apply in temperatures below 55° F or in damp, cold or humid conditions, this will result in low adhesion and poor durability
Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.