AquaThane™

AquaThane™

$34.56

AquaThane™ (formerly known as DuraGard™) is a furniture finish quality, co-polymer acrylic urethane that can be used as a topcoat on any plain or decorative surface where maximum durability is required. It is a super hard topcoat with the flow-out of solvent-based material, in a water-based formula

SKU: 00028 Category: Tag:
Approved Application Area Walls, Ceilings, Floors (Wood), Floors (Cement), Floors (Other), Cabinets (Raw), Cabinets (Pre-Finished), Countertops, Plastic Accents (Switch Plate ETC)
Application Method Brushed, Rolled, Sprayed
Clean Up Soap & Water
Approved Climate Rating Interior/Exterior
Consistency (Density) Thin Liquid (Watery)
Available Sizes & Square Footage 5 Gallon Pail- 1501 – 2000
1 Gallon Jug- 301 – 400
32 Oz Jug- <100
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture Smooth (Paint Like)
Intermix No
Manufacturer Faux Effects International
Product Line Silver Line
Shelf Life 1 -2 Years
Approved Substrate Painted Drywall, Raw Wood, Painted/Pre-Finished Wood
Suggested Additives No
  • To spray, thin up to 20% with water.
  • Because of its ability to resist staining or marring, AquaThane™ is excellent for kitchen cabinets, trim, tabletops and floors.
  • Can be used as a final clear topcoat over concrete for maximum durability. The concrete should first be coated with SetCoat® (AquaBond™) or AquaGard™ for superior bonding and penetration of the substrate.
  • On floors and walkways use a minimum of 2 coats of AquaThane™ over SetCoat® or AquaGard™.
  • Clean the work surface, removing any dust or debris.
  • Using a brush, roller or spray unit, apply 2 even coats of AquaThane™. The best results are obtained by spraying the product.
  • Because AquaThane™ has strong co-solvent properties, it is best to apply a coat of ColorSeal™ or AquaGard™ first. Allow this barrier coat to dry before proceeding with AquaThane™. This will prevent the disruption of any sensitive color glazing or artwork.
  • Permit AquaThane™ to dry for approximately 4-6 hours between coats.
  • Allow AquaThane™ to cure for 72 hours before polishing or rubbing smooth with steel wool or polishing compounds.
  • V.O.C. compliant
  • Non-Yellowing
  • Chemically Resistant, including alcohol
  • Resists marring
  • Anti-Sagging Qualities
  • Store in a cool, dry location to prolong shelf life.
  • Do not apply in temperatures below 55° F or in damp, cold or humid conditions
  • Technical product- training through Faux Masters Studio workshop recomended

Utilizing Faux Effects® Rubbing Compound™ to polish will increase gloss to full potential. Great on table tops and floors!

Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Related products

0