AquaStone®

$10.03$250.81

AquaStone™ (formerly known as FauxTex™) is a textured material that contains actual marble dust suspended in an acrylic resin. A full-bodied material that holds its shape when troweled or texturized, AquaStone® enables the artisan to create a wide variety of relief-based finishes. Stucco patterns, limestone, coral stone, as well as brick and block walls are easy to replicate with this dimensional product. AquaStone® is the perfect choice for embossed stenciling.

Clear
SKU: 000106 Category: Tags: ,
Approved Application Area Walls, Ceilings, Floors (Wood), Floors (Cement), Countertops
Application Method Brushed, Rolled, Stippled, Troweled
Clean Up Soap & Water
Approved Climate Rating Interior/Exterior
Consistency (Density) Heavy Plaster
Available Sizes & Square Footage 5 Gallon Pail- 501 - 1000
1 Gallon Pail- 101 - 200
32 Oz Pail- <100
16 Oz Container- <100
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture Medium Grit
Intermix No
Manufacturer Faux Effects International
Product Line Silver Line
Sheen (Finish) Matte (Flat)
Shelf Life 120 - 365 Days
Approved Substrate Primed Drywall, Painted Drywall, Cement
Suggested Additives FauxCrème Colors™
  • AquaStone® may be tinted with FauxCrème Color™; however, dark colors cannot be obtained.
  • Always apply AquaStone® over a well-sealed surface using SetCoat® Clear or SetCoat®.
  • Thoroughly clean the work surface.
  • Tint SetCoat® to a grout or mortar color (3 oz. of Van Dyke Brown FauxCrème Color™ added to one quart of SetCoat® Clear creates a good grout color).
  • Apply two coats of this mixture to the work surface, letting the first coat dry a minimum of 4 hours before applying the second coat. Let the second coat dry a minimum of 24 hours.
  • Prepare a brick grid using easy-to-remove, low-tack tape, making sure to simulate a staggered brick pattern. Pinch and/or tear the tape to make grout lines more realistic.
    • Apply up to 1/8” layer of AquaStone® over the entire taped area using a trowel. (After the first layer has dried, additional layers can be built up in specific areas, if desired, for a more dimensional look. Do not apply each layer more than 1/8” in thickness.)
  • Stipple the material with a plastic bag, sponge or trowel. Allow the material to dry approximately 15 minutes until it starts to set.
  • Using a trowel, level off or flatten any high peaks that formed during the stippling process.
  • Let dry at least 8 hours.
  • AquaCreme™ or AquaGlaze® color mixtures may now be applied to the finish to enhance the overall effect.
  • Remove the tape grid.
  • A final clear coat of ColorSeal™, AquaGard™, or AquaThane™ is recommended for increased durability, especially in kitchens, bathrooms and commercial areas.
  • V.O.C. Compliant
  • ASTM E84 Class A rating for smoke development and flame spread
  • Resists fading
  • Excellent bonding qualities
  • Easy to sand
  • Do not apply in temperatures under 55°F, or in damp, cold or humid conditions.
  • Technical product- training through Faux Masters Studio workshop recommended
Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.